Moderatorzy: Zachu, wojtek, Spider, PouchX
Wg mnie byla nawet od wersji 0.22 (wtedy zacząłem)pelsta napisał(a):Widzę, że w GmapTool v0.32 pojawiła sie opcja -o!
Dzięki. Mi jej bardzo brakowało.
gmt -s [-v] [-i] [-h] [-m mapa] [-o scieżka] plik.img...
The GMapTool v0.3
The "files"
Tab used to gather all the input files. There are the following:
• Add files - causes the dialog input files. " After loading the files in a window will display the names of the files. Using a mouse or keyboard, you can select the selected files.
• Delete - removed from the list of selected files.
• Info - initiates the action to read the selected files. Information about the contents of the files will appear under the "Log".
• Details - initiates the action to read the selected files. Detailed information about the contents of the files will appear under the "Log".
Dialog "input files" enables the identification of one or more input files. You can also enter the name of the file with the keyboard.
The list of "Favorites" allows you to remember a few selected folders and quick access to those folders. The choice of disk drive, Windows can be done by pointing to the folder "My Computer".
The "Options"
The option allows for the introduction of defining the physical appearance and behavior of the program. Options are as follows:
• Appearance - position determines the schedule graphic display elements of the programme. The "System" sets the appearance consistent with the characteristics of the operating system.
• Language - position allows the choice of language or English. The "System" sets the language in accordance with the operating system settings. Changing language is when you restart the program.
• Detailed announcements - position determines what messages will be displayed under "Log" at the action programme.
• Advanced settings - position attached advanced input parameters for the implementation of operations to connect, share and save maps. In most advanced operation parameters are not needed.
• experimental options - options position is attached to the experimental testing program features. Files created using experimental options may not be compatible with the format recognized by the GPS receivers. Do not load up these files to the internal memory GPS safely conduct experiments on the flash card. In the case of blocking the GPS, you can simply remove.
The "Connect"
The parameters used to introduce the necessary operations to comply with the merger. Łączeniu are subject to all the files from the "files", regardless of whether they are selected or not.
It is necessary to introduce the name of the output. This can be done causing a dialog key "file" or typing a name using the keyboard in line beside the key. Other parameters are optional. The importance of the parameters is as follows:
• File - specifies the name of the output. This file will be saved all the maps placed under "Files."
• Mapset - specifies the name of the entire combined file. By default, the program entered in this place called "GMapTool All".
• Add a new code - one parameter to enter unlock code consisting of 25 characters. Myślniki are ignored. The introduction of more codes use the file *. unl.
• Set FID mapsetu - to enter parameter values FID and PID to generation record in Block F-MPS. The need to set in the case of a merger of individual maps. If the merger are subject to mapsety created Mapsource program, the parameter is redundant, the F records have already been generated by Mapsource.
• Remove unlocking codes - The causes of the output are not recorded for unlocking the codes contained in the input files. The parameter is not blocking entry of a new code from the box above.
• Create map demo - the output file will have the marker map demo. This map does not require the receiver unlock code but after reading the map fall in demo mode. Do not load the maps demo memory inside the receiver, in some cases, the removal of such maps could prove impossible.
• Remove autorouting and DEM - The advanced, causing output to a file are not recorded data on autoroutingu (subsets NOD) or data on height (subsets of DEM). This option can be used to create maps for older models of GPS.
• Short headline - The advanced, will save the header of a length 1KiB. Most programs used 4KiB headlines.
• Set the size of the block - The experiment to define the size of the block entry into the harvest output. Acceptable values are 1, 2, 4, 8 ... etc. The files of maps apply blocks of size from 0.5 to KiB 64KiB, without mentioning the parameter GMapTool the program automatically calculates the optimum value.
• Combine - initiates the execution of the operations merger in accordance with the specified parameters.
• Delete - button erases all entered parameters.
The "Share"
The serves to introduce the parameters for the operations division mapsetu on a single map. It is necessary to provide the folder in which the maps will be saved. Other parameters are optional. The operation division applies to all files placed on the "Files", regardless of whether they were selected or not.
The operation division has two modes of operation. In basic mode, the program GMapTool saves all the files contained in the collection of input. Files can be used to create another mapsetu or for editing. In the mode of creating files for Mapsource GMapTool generates additional files needed to connect. It will be a set of TDB and empty map poglądowa named mapset00.mp.
In addition, a file is needed to connect mapset00.mdx index file *. mdr. Unfortunately GMapTool not able to convert a file from MDR mapsetu into a format acceptable to Mapsource. Therefore, there should be no attempt to attach files created mdx and mdr to Mapsource, will not work properly.
In order to connect up to harvest Mapsource should compile a file mapset00.mp. The compilation maximize use cgpsmapper. Then, make the appropriate entries in the Windows registry. This operation can carry out the program MapSetToolKit, which is to take advantage of the "existing install a mapset."
The parameters available on the screen are as follows:
• Folder - The folder shows to what should be created to save files. The folder can be selected by opening a dialog with "folder" or type using the keyboard to the line located next to the button.
• Short headlines - The advanced, will save the harvest with a header length 1KiB. Such headlines expect some programs, such as Older versions of the compiler cgpsmapper.
• Mapset - parameter to enter the name of mapsetu. This name will appear in the maps shown by Mapsource.
• Set FID mapsetu - parameter allows you to select the value of FID and PID for creating a file TDB. If the value is different than the actual data contained in the maps may be problems with unblocked coded map. The FID and PID to be given in the case of connecting mapsetu consisting of a variety of map products.
• Set CodePage - The advanced setting allows the entry of CodePage to file TDB. If the parameter is not specified, GMapTool see the value in the data maps.
• Limit the length of 178.5 ° - The advanced, to provide the causes that restricts the scope of the maps poglądowej to 178.5 ° longitude. This parameter was introduced in order to obtain the correct compilation maps poglądowej connecting your base maps covering the entire world.
• Create TDB v3 if possible - The advanced. GMapTool typically generates a TDB version 4, which is not sufficiently documented. The format version 3 is known much more precisely, unfortunately, TDB version 3 is not suitable for more advanced maps, for example, autoroutingiem or from the DEM.
• Combine - initiates the execution of the operations division in accordance with the specified parameters.
• Delete - button erases all entered parameters.
The "Type"
Tab used to provide data to be entered directly into the original maps. Operation "Enter" will only work on files selected under the 'Files. " It has independently review the files selected for the various operations "Connect". You can provide the following parameters:
• Set transparency - a parameter allows you to set the properties of maps.
• Set priority - parameter to set a priority order of drawing maps. The receiver draws first maps of a lower priority. Maps with a higher priority are drawn and later covered previously drawn. The value should be in the range of 0 to 31
• Enter the code odblokowujący - can enter a code odblokowujący. GMapTool tries to put the code in a file, but the operation is not always possible. If it fails, use the operation "Connect".
• Only for FID - indicate parameter causes that all changes are made only for maps of the consistent numbers FID and PID. A value of 0 to match any maps.
• Change ID maps - The advanced, to change the ID assigned by the author maps. The operation was designed to maps prepared by the compiler cgpsmapper.
• Type - initiates the execution of operations in accordance with the entry of specified parameters.
• Info - initiates the action to read the selected files. Information about the contents of the files will appear under the "Log".
• Delete - button erases all entered parameters.
The "Log"
The only information generated by the program. In the following operations are available:
• Search - allows you to search for a set text. Finding runs from the beginning of the buffer bookmarks.
• The next - the next of search results in text using the "Search".
• Delete - clears the entire contents of a buffer.
• Stop - button appears in the execution of the program set by the operation. Pressing interrupt the operation.
Użytkownicy przeglądający ten dział: Brak zalogowanych użytkowników i 3 gości