Garmin BaseCamp

[miecho]

Zbieranie danych... porażka, może firewall pomoże.
Czemu ten program tak "muli"?
Pozytywy na pierwszy rzut oka:
- pierwszy program, który potrafi odczytać waypointy z Edge 800 (szczegół, że zamiast ikon domków pokazuje jelenie...)
- można zaprojektować trasę, później przekonwertować ją na ślad - po wgraniu do Edge 800 uzyskujemy Kurs z profilem wysokości !!!!.
Ps
Ale ten program jest "przymulony"....

[asandrzej]

Trasa wyznaczona bezpośrednio w Base Camp po szlakach jest wyznaczana z routingiem,
po przetworzeniu ze śladu routing nie działa.

Po przetworzeniu śladu na trasę, trasa jest wyznaczana na krechę,
nie można przeprowadzić rekalkulacji (przynajmniej po szlakach),
ale można skopiować do MapSource i przeprowadzić rekalkulacje.
Trasa po rekalkulacji w MS dział poprawnie w Base Camp.

andrzej

[pelsta]

Na razie oceniam interfejs użytkownika, który wg mnie zdecydowanie poprawiono. Inne funkcje programu traktuję jako wersje beta, może nawet są powyłączane. Bardzo długo się uruchamia - potem działa płynnie.
Zauważcie, że BaseCamp_313.exe ma 119MB a BaseCamp_3.2.0.1_Beta.exe ma 58MB

[asandrzej]

Na razie oceniam interfejs użytkownika, który wg mnie zdecydowanie poprawiono.

Witam

Chyba wrócono do poprzedniego interfejsu , przynajmniej podobny już był w starszych wersjach.

Pozdrawiam

[miecho]

Trasa wyznaczona bezpośrednio w Base Camp po szlakach jest wyznaczana z routingiem, po przetworzeniu ze śladu routing nie działa.

Popatrz na to z perspektywy E800, wtedy to troszkę inaczej wygląda.

[asandrzej]

Witam
Jeżeli chodzi o transfer do odbiornika to jest OK. tylko,
czemu Base Camp nie rekalkuluje przetworzonej trasy ze śladu i trzeba się wspomagać MS,
żeby zobaczyć trasę z routigim w Base Camp.
Możliwość zmiany śladu na trasę była w starszych wersjach.

andrzej

[miecho]

Default BaseCamp 3.2.0.2 beta is available
A beta version of BaseCamp 3.2 is available (link below). Please read the following:
Beta 3.2.0.2
Warning

This is beta software, or an early peak at an incomplete product. We value your input, so we are providing this to you so that you can send us your comments and ideas. We have tested this beta version extensively, but that doesn't mean that there won't be bugs. Use at your own risk.

Notes

Please backup your existing data from BC 3.1 before running the beta.
The beta build requires you to allow Garmin to collect statistics on how you use BaseCamp to help us improve the application. This will be optional for the release of BaseCamp 3.2, but it is a required condition for using the beta.


Changes

Changes listed below are above and beyond the previous beta

• Improved routing
• BirdsEye downloads should now work
• Added dragging photos onto the map views
• Added dragging files into My Collection and the user data list
• Added activity profile selection dialog at startup, improved migration of existing route settings and routes
• Added better preserving app state when restarting (selected tool, selected folder, selected view modes, etc)
• Added support for restoring backups from different computers
• Changed drawing style of routes and tracks to use thinner lines
• Fixed issue with adding and removing links on various property tabs
• Various improvements to the draw order slider for imagery
• Improved find address near center of screen
• Removed filtered routes
• Removed the "Route style" group box from the route options since it doesn't make sense to have multiple "Direct" route profiles.

[miecho]

BaseCamp software version 3.2.1

Notes:

• Windows XP Service Pack 3 or later is required.
• .NET framework 3.5 SP1 is required. A current version of .NET will be installed if needed.
• 1 GB of system memory is required, 2 GB of system memory is recommended when using BirdsEye Imagery or Garmin Custom Maps.
• A video card that supports OpenGL version 1.3 or later is needed to enable the 3D view.
• If you experience problems when interacting with the map views, please make sure that you have installed current video card drivers.
• BaseCamp will recognize all MapSource products except BlueChart.
• BaseCamp does not work with serial GPS devices.

Changes made from version 3.1.3 to 3.2.1:

• Moved the various property tabs to a separate dialog
• Added swapping the map and data list UI regions
• Added activity profiles to allow easier changes between common routing configurations
• Added activity profile selection dialog at startup, improved migration of existing route settings and routes
• Added dragging photos onto the map views
• Added dragging files into My Collection and the user data list
• Added better preserving app state when restarting (selected tool, selected folder, selected view modes, etc)
• Added support for restoring backups from different computers
• Added geocache search integration with OpenCaching.com
• Added photo sharing site upload (currently for Picasa)
• Added track statistics that correspond to the selection in the track points list
• Added additional statistics to the elevation profile
• Added display of elevation profile when batch editing routes or tracks
• Added heart rate and cadence to the track points list and elevation profile
• Added route to track conversion
• Added display mode for geocaches
• Added the 'Duplicate' menu item for most user data types
• Added continuation of route/track drawing when switching between tools
• Added route avoidance checkboxes to the route options (such as 'Avoid U-turns')
• Added a basic dialog for creating routes
• Added draw order control for new BirdsEye Imagery that is downloaded
• Added user selection of application language
• Added option to restore the application to default settings
• Added tips dialog when entering full screen mode
• Added a keyboard shortcut to snap the map back to North up
• Added file import/export support for the TCX file format
• Added file export support for tab-delimited and comma-delimited text
• Added properties and create waypoint commands to the list of POIs that is displayed when hovering on the map
• Added optional collection of analytics to help us improve the application
• Added display of the detailed coverage region of card/device based maps
• Added notification to user when updates are available for devices
• Added receiving FIT course points and activity data from many fitness devices. These are converted into waypoints and tracks.
• Added support for the GroundSpeak geocaching 1.0.1 extension
• Changed geotagging photos from a track to add links to those photos in the track
• Changed to not allow changing the location of geocaches when they are part of a route
• Changed the divide tool to create a new waypoint or trackpoint at the division point
• Changed drawing style of routes and tracks to use thinner lines
• Fixed issue where we didn't always remove all waypoints created as part of a route
• Fixed issue with adding and removing links on various property tabs
• Improved find address near center of screen
• Removed filtered routes

BaseCamp_321.exe

[Zachu]

BaseCamp software version 3.2.2

Changes made from version 3.2.1 to 3.2.2:

Fixed an issue with migrating waypoints with thumbnails from previous versions of BaseCamp to 3.2.1. This issue could have corrupted the database.
Fixed an issue with tracks that had been duplicated becoming corrupted.
Added a prompt to notify the user when data loss might have occurred.
Added a 'restore from previous version' menu item.
Added support for exporting of fitness data (heart rate and cadence) in tracks.
Changed to attempt to fix the paths in Garmin Custom Maps (KML ground overlay) files at start-up without notifying the user that there were problems with the file.
Changed the message displayed at start-up when the current video mode/card doesn't support 3D.
Improved initial download size estimates for some BirdsEye products.
Fixed some issues with undo/redo.
Fixed several issues related to application shutdown.
Fixed an issue with not recognizing Garmin mode USB device (such as the GPSMap 60) arrival and removal.
Fixed several issues related to aborting transfers to Garmin mode USB devices.
Fixed some issues related to ejecting mass storage devices.
Fixed some issues with changing folder selection while using the BirdsEye wizard.
Fixed an issue with reading geotagged photos from many smartphones.

http://www8.garmin.com/support/download ... sp?id=4435

[Castel 899]

Witam!
Wczoraj ściągnąl mi się razem z 2012.30 BC 3.2.2.0 i mam 3 (na razie ) pytania:
1) Jak ustawić kąt odwzorowania mapy? Podpowiedź PouchX-a dla MS "Ctrl+Alt+A" tutaj mi nie działa.
2) Gdzie są narzędzia do transferu map?

... Jeżeli chodzi o transfer do odbiornika to jest OK. tylko,
czemu Base Camp nie rekalkuluje przetworzonej trasy ze śladu i trzeba się wspomagać MS, ...

Chiałem spróbować aktualizacji UMP z BC i . No i jeszcze (też w związku z wpisem Andrzeja):
3) Otworzyłem ślad.gpx BC-em i mapa jest, a śladu nima . Dlaczego ?

[Zachu]

1. Nie wiem czy istnieje taka kombinacja
2. Mapy wysyła Mapinstall, który instaluje się dodatkowo. Mało intuicyjna jest procedura.
Wybierasz odbiornik lub kartę, prawy przycisk myszy i Zainstaluj mapy ...
3. Nie wiem. U mnie wystarczy poczekać aż BC sam pobierze wszystkie dane z odbiornika przy rozruchu i jest wszystko.

[Zachu]

his is the change-list from 3.2.2 to 3.3.0.2. I will add some explanations and screen-shots in later posts.

Added collapsible list folders and sub-lists for improved organization.
Added shaping point support for zumo devices like done in MapSource.
Added explicit support for shaping points. These will be transferred to supporting devices.
Added support for transfer of waypoint categories on supporting devices. These are displayed in BaseCamp as lists.
Added more activity profiles, with improved activity routing on supported maps.
Added specific avoidances for various road classes, removed the road selection slider.
Added custom activity profiles.
Added keyboard short-cuts for editing tools (divide, insert, erase).
Added a tools menu for easier discovery of tool keyboard shortcuts.
Changed to make GPX files on a memory card directly editable.
Changed to read all GPX files on a memory card, similar to how devices behave.
Improved graphing of track data.
Improved graphing when multiple routes or tracks are selected.
Improved layout of geotagged photo, waypoint, route, and track properties.
Added additional statistics to route and track properties.
Added 'Center on map' check-box on route and track dialogs.
Added an easier way to add waypoints to routes (Insert Waypoint button).
Added additional data fields to waypoints (such as address and phone number).
Added display and updating of date last modified for waypoints.
Added display of lists that contain this data item to properties.
Added receiving geocache visits from devices.
Added logging geocache visits on OpenCaching.com.
Added printing of geocaches.
Added alternate notification mechanism (less annoying pop-ups).
Added display settings to adjust width of routes and tracks.
Added support for importing waypoints and tracks from KML/KMZ files.
Added suggested file name when exporting (so it isn't always 'untitled').
Added more map details for higher detail setting.
Added data filters to map view.
Added preserving the dialog size for each data type.
Added option to reset track's altitude to map data.
Added functionality to remember display feature settings per profile.
Changed 'Remove List and Contents' to 'Remove list and unique contents'.
Added Shift-Delete short-cut for 'Remove list and unique contents'.
Improved printing of routes and tracks.
Fixed issues with sending routes to the zumo.
Fixed elevation profile labels for Windows XP (no longer invisible).
Fixed issue when duplicating a route. BaseCamp will now also duplicate the waypoints in that route.
Fixed issue with the data filter not being remembered between application runs.

developer.garmin.com/apps/BC/BaseCamp_3.3.0.2_Beta.exe

[septimus19]

Witam
Jest problem, 3.2.2 nie radzi sobie z plikami KMZ.Szybko wrócilem do starszej wersji-hybryda wektorowo-rastrowa to jest to, co bardzo sobie cenie w BC.

Pozdrawiam

[septimus19]

Witam
Hybryda na PC,szkoda że nie można takiej mapy zobaczyć w odbiorniku!

Pozdrawiam

[asandrzej]

Witam

E..tam, nie wiem czy szkoda, ale taką mapę można zobaczyć w odbiorniku,
na pewno nie we wszystkich, ale można.
Inna sprawa, czy taka mapa jest przydatna w terenie, to już musi każdy sam ocenić.

Pozdrawiam

Pobierz http://www.mediafire.com/?sgiqik16g05j314 , umieść w odbiorniku,
włącz wyświetlanie 3-D, napisz co zobaczyłeś.


Można pobrać http://www.mediafire.com/?euh6iwwe6gu7edu
Edit: Pliki nie są przeznaczone do nawigacji Garmin

i mieć każdą mapę ( płaską) wyświetlaną w odbiorniku jako plastyczną.

Za scren, to dostane burę od GpsManiaka.